Leyenda Ultrasonic Printhead Cleaning Machine , Seiko Epson Print Head Cleaning Machine
Application
Leyenda print head cleaner machine is the professional manufacturer, which have engineers to solve the problem of the machine the customer pre-sales and after-sales. The print head cleaner machine can be adjustable the print head shelf to suit for different kind of print head. Usually it can be clean in a few minute and back to work again like usual before it was. To make period of cleaning process to print head is very important, because this can protract the life of print head much longer, and decrease the waste for print head clog, save printing cost.
Function Parameter Guideline
| Brand | Leyenda |
| Input electricity | AC220V+-10% 50Hz |
| Ultrasonic frequency | 40KHZ |
| Ultrasonic power | 50W |
| Clean efficiency | about 99% |
| Color | silver |
Operation
Step1 : Open the bottom lid of the machine and the lid of cleaning fluid tank
Step2 : Pour cleaning fluid into the cleaning fluid tank.. The minimum should be over the water outlet port of the tank
Step3 : Cover the cleaning fluid tank lid .and then the bottom lid of the machine
Step4 : Open the top lid and put onnozzle holder
Step5 : To connect the inlet of print head to the flushing pipe
Step6 : To insert the print head into nozzle holder
Step7 : The inserted print head
Step8 : Pour cleaning fluid into the cleaning tank ,to close to the water outlet port
Step9 : Press the red bottom to start theultrasonic cleaning
Step10 : Press the nozzle holder by hand ,so that the nozzle can be immersed in cleaning fluid.
Step11 : Release the nozzle holder after ultrasonic cleaning about 3 min. Then press the corresponding green buttom to rinse the print head
Step12 : Repeated cleaning for several times.and Cleaning the print head again after changing the cleaning fluid . Until the cleaning fluid which jet from the nozzle is soigne and clean. Then re-install it on the printer after cleaning up the print head.
Machine Details
1. The following mentioned is the cleaning solution was to fight to the wash tank into the pipeline, pumping the contrary, from the wash tank out.
2. main types of work for the first work, corresponding to the main working time, mainly in the mode 1,3, when the cycle inject. In mode 2, the main pumping cycle, the cycle mode 4 for the vice inject.
3. The type of work for the deputy work is, corresponding to the Deputy working hours, in the mode of 1,4-deputy pumping cycle. In mode 2 injecting of
Vice-loop. when in the main loop pumping in mode 3
4. The main loop is cycle of the four pipe connecting sprinkler; the deputy loop is cycle of the single pipeline connecting the wash tank, mainly used to inject fluid or pumping fluid. They do not correspond to main or deputy type of work.
General Operation:
1. To prepare a clean bottle of cleaning fluid, a waste bottle. (Note: The panel interface of two channels, one is for clean wash fluid, another is for fluid output connected to dirty water bottles. First cleaning nozzle pipe with mode 1, when the dirty liquids is pumped over basically, removed the bottle. Finally clean the both pines with wash cleaning liquid cycle)
2. The appropriate choice of cleaning nozzle holder, nozzle and take a good external cleaning fluid and waste associated pipelines, according to a good power supply can be switched after.
3. Changes working mode, pressure, pipe number, the main working hours, the Deputy working hours
Product Photo
